Mechanical engineering

Information about the department.

The department was founded on September 1, 1980 named “Mechanical Engineering Technology”. In 1981, for the first time 38 engineers-teachers in the field of Mechanical Engineering graduated the department. In 1981-2021, more than 2000 bachelors and masters in the field of Mechanical Engineering successfully completed the training, and are effectively working in various sectors of the economy of Republic and Commonwealth of Independent States.

From 1982 to 1992, candidate of technical sciences, associate professor I.V. Zaplatkin was the head department of “Mechanical Engineering Technology”, in 1994 the department was reorganized under the name “Mechanical Engineering”, the head of which were candidate of technical sciences, associate professor I.I. Safarov in 1994-2005, candidate of technical sciences, associate professor N.A. Dustkarayev in  2005-2010, candidate of technical sciences, associate professor N.F. Urinov in 2010-2011.

In accordance with Decree of the President of Republic of Uzbekistan No PD-1533 dated May 20, 2011 “On measures to strengthen the material and technical base of higher education institutions and radically improve the quality of training highly qualified specialists”, at the time of establishment of Bukhara Engineering-Technical Institute of High Technologies, the department was called “Materials science and technology of new materials” and was headed by candidate of technical sciences, associate professor N.F.Urinov. In accordance with the Decree of the President of the Republic of Uzbekistan No PD-1954  dated April 15, 2013 “On the establishment of Bukhara Engineering-Technological Institute”, Bukhara Engineering-Technological Institute was established and “Materials science and technology of new materials” department has started to train bachelors based on the department “Technologies and equipment”.

       In 2018, the department launched a doctoral program, and currently 6 doctoral students and 1 independent researcher are engaged in research work.

On August 7, 2017, according to the decision of the Academic Council of the Bukhara Engineering-Technological Institute, the department of “Mechanical Engineering Technology” was reorganized and headed by N.F. Urinov. At present, the department trains the specialists in a bachelor degree 5321500-Technology and equipment (mechanical engineering) and 5111000-Professional education (5320200-Mechanical technology, equipment and automation of mechanical engineering), 5320200-Mechanical technology, equipment and automation of mechanical engineering, and master degree 5A321502-Technologies and equipment (by industry).
 

        
DISCIPLINES TEACHED AT DEPARTMENT:

Bachelor degree:

• Fundamentals of technology of mechanical engineering
• Machine elements 
• Technology of mechanical engineering and fundamentals of design
• Theory of machines and mechanisms
• Materials science and technology of construction materials
• Hydraulics and hydropneumatic operations 
• Computer design
• Cutting theory and cutting tools
• Technologies and equipment used in hammering and stamping
• Technological equipment for automated production
• Turning work
• Milling work
• Fundamentals of automatcs and automation of production processes
• Training workshop
• Repair and operation of process equipment
• CNC technological equipment of flexible production systems
• Control of technical systems
• Modern innovative methods and technologies in mechanical engineering
• Technology of mechanical engineering (special part)
• Design of automated plots and workshops
• Design and production of castings
• Fundamentals of automated production technology
• Technology and equipment for plastic deformation processing
• Technology of construction materials
• Materials science
• Fluid and gas mechanics
• Mechanical technological means
• Hydraulics and thermal engineering
• Fundamentals of mechanical engineering
• Hydraulics
• Theory of machine mechanisms
• Materials science
• Fundamentals of machine design
• Tool systems and shaping processes: Theory of cutting
• Tool systems and shaping processes: Tool systems
• Structural materials technology and materials science
• Machine elements 
• Engineering technology of refrigeration and climate equipment

Master degree:

• Scientific fundamentals of automated production technology
• Programming of complex surface treatment on CNC machines
• Preparation of research work and master’s dissertation
• Scientific pedagogical work
• Design and manufacture of cutting tools
• Design of machine tools and machine tools equipment
• Quality and competitiveness management
• High speed machining
• New construction materials in mechanical engineering
• Advanced technologies and processes of production
• Application of robotics and robotics complexes
• Scientific seminar
• Calculation and design of machines tools and machine systems
• Control systems of machine tools

TEACHing stuff OF THE DEPARTMENT

SCIENTIFIC WORK CARRIED OUT AT DEPARTMENT

Applied project work carried out in 2018-2020 

• OT-Atеx-2018-373 applied project “Development of technology of cutting of the saw teeth of working part of the saw cylinder of technological machines for the separation of cotton seeds using laser beam”. (2018-2020). Project Manager – N.F. Urinov. Project funds – 500 million UZS.

TEXTBOOKS AND TUTORIALS 

1. N.F.Urinov, M.H.Saidova. Materials science and technology of metals // Tutorial. Tashkent. T.: Ukituvchi. 2002, 87 p.

2. N.F. Urinov, M.H. Saidova, A.A. Norkulov. Materials science and technology of construction materials // Tutorial. Tashkent. T.: Fan. 2003, 288 p.

3. M.G. Vasiyev, N.F. Urinov, V.M. Khromeenkov. Equipment of enterprises for the production of bread and pasta // Tutorial. Tashkent. T.: ILM ZIYO. 2007, 365 pages.

4. MGVasiyev, NFUrinov, VMKhromeenkov Equipment of enterprises for the production of bread and pasta // Tutorial, 2^nd edition. Tashkent. T.: ILM ZIYO. 2016, 365 p.

5. M.H. Saidova. Design and production of cutting tools // Textbook. Bukhara: Durdona. 2021, 295 p. 

Monographs

1. Urinov Nasillo Faizilloevich. “Improving the efficiency of machines for cutting raw macaroni products with a cassette production method”.

2. Saidova Mukhabbat Khamroevna. “Improving the technological reliability of thin lamellar knives for sliding cutting of food semi-finished products”.

3. N. Barakayev, M. Saidova, M. Amonov. “Improving the technological reliability of thin lamellar blades”

4. Nezhmetdinov Ramil Amirovich, Urinov Nasillo Fayzilloevich, Abdullaeva Dilnavoz Husniddinovna. “Development of specialized test bench for recoding programs for digitally controlled devices”

5. N.R.Barakaev, H.F.Djuraev, O.A.Mirzaev, N.F.Urinov “Scientific bases of development of the nut-biting device”.

CERTIFICATES FOR SOFTWARE AND ELECTRONIC DATABASES concerning INFORMATION-COMMUNICATION TECHNOLOGIES, DIFFERENT COPYRIGHTED MATERIALS 

1. Urinov N.F., Saidova M.H., Jurayev J.M. Electronic textbook No. DGU 13348 on the subject “Computer design”.
2. Urinov N.F., Nezhmetdinov R.A., Abdullaeva D.X. Electronic textbook No. DGU 10965 on the subject “Software component for representing the states of operation of electroautomatics for equipment control systems”.
3. Urinov N.F., Saidova M.H., Zainiyev H.M. Electronic textbook No. DGU 13542 on the subject “Technology of construction materials and materials science”
4. Urinov N.F., Saidova M.H., Yuldashev M.N. Electronic textbook No. DGU 13668 on the subject “Technological equipment of automated production”.
5. Urinov N.F., Saidova M.H., Sayliev I.I. Electronic textbook № DGU 13671 on the subject “Materials science”.
6. Urinov U.A. Electronic textbook No. DGU 10114 on the subject “Mechanical engineering technology”.
7. Barakayev N.R., Saidova M.H., Amonov M.I. Electronic textbook No. DGU 13669 on the subject “Theory of cutting and cutting tools”.
8. Amonov M.I., Urinov N.N., Abdullayeva D.H. Electronic textbook No. DGU 13117 on the subject “Intellectual module for the analysis of the electroautomatic state of the technological device” 
9. Saidova M.H., Urinov N.N. Electronic textbook No. DGU 13677 on the subject “Software component for the adjustment of electrostatic screens for the control system terminal”.
10. Dubrovets L.V., Isamov R.N. Electronic textbook No. DGU 13521 on the subject “Equipment of mechanical engineering productions”.
11. Dubrovets L.V., Isamov R.N. Electronic textbook No. DGU 13578 on the subject “Theory of mechanisms and machines”
12. Sokhibov I.A. Electronic textbook No. DGU 13607 on the subject “Technology and equipment used in hammering and stamping”
13. Yuldashev M.N., Ergashov D.R. Electronic textbook No. DGU 12550 on the subject “Fundamentals of automated design systems”
14. Adizova S.Y. Electronic textbook No. DGU 12008 on the subject “Automated production technology”.
15. Djumaev Z.F., Kalandarov N.O., Sayfullayev S.S. Electronic textbook No. DGU 09947 on the subject “Hydraulics and hydropneumatic solutions”.
16. Kalandarov NO, Shodiyev ZO, Shohimardonova N.Sh., Shodiyev N.S. Electronic textbook No. DGU 12178 on the subject “Machine elements and fundamentals of design”
17. Kalandarov N.O., Shodiyev Z.O., Barakayev F.N., Yakubov M.E. Electronic textbook No. DGU 12177 on the subject “Theory of machines and mechanisms”
18. Djumayev Z.F., Gadoyeva O.P., Asrayev Z.R. Electronic textbook No. DGU 10231 on the subject “Practical issues of concreting technology in hot dry climates”

SCIENTIFIC WORKS INcluded in SCOPUS AND WEB OF SCIENCE bases

Articles published in foreign journals

Scientific articles in the republican scientific journals (in the list of Higher Attestation Committee)

1. Urinov N.F., Barakaev N.R., Amonov M.I., Sohibov I.A. “Research of the cutting ability of knives depending on the main characteristics of the microgeometry of the blades”. Scientific-technical journal “Development of science and technology”. Bukhara No. 2/2021, pp. 55-61.
2. Urinov N.F., Barakaev N.R., Amonov M.I., Sohibov I.A. “Installation for preparation for work of lamellar knives of high technological reliability”. Scientific-technical journal “Development of science and technology”. Bukhara No. 2/2021, pp. 73-77.
3. Urinov N.F., Nezhmetdinov R.A., Abdullaeva D.H. “Research of logical control systems for technological equipment based on specialized bench equipment”. Scientific-technical journal “Development of science and technology”. Bukhara No. 1/2021, pp. 181-185.
4. Urinov N.F., Urinov B.O. “Analysis of the use of various instruments for measuring forces in diamond burnishing”. Collection of materials of the scientific-methodical journal “Creative teacher”. November 5, 2021, No. 12, pp. 430-434.
5. Urinov N.F., Tuymurodov J.B. “Trends and directions of development of CAM-systems”. Collection of materials of the scientific-methodical journal “Creative teacher”. November 5, 2021, No. 12, pp. 424-429.
6. Urinov N.F., Narzullayev M.A. “Comparison of microcontrollers for controlling CNC machines”. Collection of materials of the scientific-methodical journal “Creative teacher”. November 5, 2021, No. 12, pp. 390-394.
7. Urinov N.F., Ramazonov A.Ch. “Study of the nature of the distribution of contact loads on the cutting wedge of the tool”. Collection of materials of the scientific-methodical journal “Creative teacher”. November 5, 2021, No. 12, pp. 252-259.
8. Urinov N.F., Sohibov I.A. “Study of the impact of efforts on the process of cutting a semi-finished food product”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021, No.13, pp. 329-332.
9. Urinov N.F., Amonov M.I. “Blade knife parameters and cutting-edge formation”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021, No. 13, pp. 313-316.
10. Urinov N.F., Abdullayeva D.H. “Study of logical control systems for technological equipment”. Collection of materials of the scientific-methodical journal “Creative teacher” December 5, 2021, No. 13, pp. 360-364.
11. Urinov N.F., Mukhamedov M.X. “Analysis of machinability of various grades of cast iron for machining”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021, No. 13, pp. 372-374.
12. Urinov N.F., Saidova M.H., Sayliev I.I. “Methods for improving the design of cutting tools”. “Development of science and technology”. No. 6/202, pp. 147-152.
13. Urinov N.F., Abdullayeva D.H., Zainiyev H.M. “Solving logical problems of digital program control using program-implementation logic controllers”. “Development of science and technology”. No. 6/202, pp. 175-182.
14. Barakaev N.R., Amonov M.I., Soxibov I.A. “Neoscalpic feature of cutting object”. “Development of science and technology”. No. 6/202, pp. 102-107.
15. Barakaev N.R. “Determination of the speed, acceleration and inertia of the sieve during the movement of the combined separator”. “Development of science and technology”. No. 6/202, pp. 4-10.
16. Dubrovets L.V., Isamov R.N. “Research of wear of tool cutting edge”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021. No. 13, pp. 79-81.
17. Dubrovets L.V., Isamov R.N. “Comparison of profiles of worm wheel models obtained by various methods”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021, No. 13, pp. 309-312.
18. Isamov R.N., Juraev J.M. “Possibilities for temperature measurement in the cutting zone”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021. No. 13, pp. 317-319.
19. Isamov R.N., Zayniyev X.M. “Possibility of application of rare metals in industrialization of Uzbekistan”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021. No. 13, pp. 353-359.
20. Juraev J.M., Yuldoshev M.N. “Analysis of CNC control systems”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021. No. 13, pp. 333-335.
21. Adizova S.Yu. Importance of technology of integrated education. Scientific reports of Bukhara State University: Available at: https://uzjournals.edu.uz/buxdu/vol5/iss1/20 (Bukhara State University Journal "Scientific Information". Bukhara, 2021.) Vol. 5: Iss. 1 Article 20.DOI:10.52297/2181-1466/2021/5/1/20.
22. Urinov U.A., Adizova S.Yu. Pedagogical conditions for the development of students in industrial practice. E3S Web of Conferences 284, 09017 (2021) TPACEE-2021 https://doi.org/10. /e3sconf/1051202128409017. 
23. Dubrovets L.V., Ergashev Z. “Building a worm wheel model in Solidworks by simulating the process of gear cutting by the running method”. Collection of materials of the scientific-methodical journal “Creative teacher”. May 11, 2021. No. 12, pp. 278-282 
24. Dubrovets L.V., Jaborrov R. “Improving the scheme for coordinating shaping movements in the machine”. Collection of materials of the scientific-methodical journal “Creative teacher”. May 11, 2021. No. 12, pp. 162-166.
25. Saidova M.Kh., Sailiev I.I. “Analysis of design features of machine tools for high-speed processing”. Collection of materials of the scientific-methodical journal “Creative teacher”. December 5, 2021, No. 13.

       In 2018, a memorandum of cooperation and work plan with “Stankin” Moscow State Technological University was approved. According to the memorandum, it is planned to train bachelor, master students and scientific and pedagogical staff. In the 2019-2020 and 2020-2021 academic years, admission based on bachelor double degree programs in six bachelor and three master specialties was carried out. 
 

     OPEN LESSONS BY PROFESSOR-TEACHERS OF THE DEPARTMENT

Leading professors and teachers of the department organize interesting and meaningful educational events at the “Information Resource Center” and “Student Residence”. 

The team of Department “Mechanical engineering technology” at the “Student Residence” event

               
The team of Department “Mechanical engineering technology” in the “32^nd orphanage”.

               
         Activities of the staff of the Department “Mechanical Engineering Technology” for vocational guidance in schools.

          FINTEGRATION OF SCIENCE AND PRODUCTION

In order to ensure the implementation of Decree of President of Republic of Uzbekistan No. PD-3151 dated July 27, 2017 “On measures to further expand the participation of industries and sectors in improving the quality of training of higher education”, cooperation agreements between the JSC “Bukhara Repair Mechanics Plant”, UE “Pump Repair”, JSC “Pipe Details”, PE “Bukharasoztamirservis”, JSC “Kogon Ginnery”, JSC “Bukhara Ginnery”, Department of Gazli Main Pipelines, Central Administration of the Navoi Mining and Metallurgical Combine, the Northern Administration of the Navoi Mining and Metallurgical Combine, JSC “Navoiyazot” and the Department “Mechanical engineering technology” were signed, and experiments and practical training in specialized disciplines are conducted in JSC “Bukhara Repair Mechanics Plant” and UE “Pump Repair”.

In 2020, the production technologies of JSC “Bukhara Repair Mechanics Plant” and their problems were studied. In the course of the study, the issues of plant automation, increasing production capacity, improving product quality, training in cooperation with universities were studied.
 

               
Laboratory rooms of the department 

There are six classrooms, three laboratory rooms, and one workshop belonging to the department. In the 2017-2018 academic year, modern laboratory equipment in the field of “Machine Details” and “Hydraulics” was purchased from the “Gunt” German company.
 

TEACHERS WHO WORK AT THE DEPARTMENT AND ARE NOW PASSED AWAY